All Products

  • Page:
  •  
  • 1
  • 2
  •  
Per page:
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

     

     

    Our unique designs adds strength and provides extra tightening power.

    Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

     

    • $45.95
  • Drag and drop me to the cart

    Our unique designs adds strength and provides extra tightening power.

    Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

    (We do not carry spare keys. We recommend storing one of the 2 included keys in a safe place)

    Lock your Rotopax fuel pack or storage box. Unique design provides extra tightening power for ultimate security.

    Please note sometimes the actual lock can get stuck if it exposed to the weather and elements. This is not unique to this product- most metal materials will rust when outside. We recommend an occasional spray with graphite or other spray lubricant (PB Blaster works great) into the lock to prevent it from rusting. 

    If you are using this mount with an extension it will defeat the purpose of the locking capability.

    Comes with a 1 year warranty.

     

    • $69.95
  • Drag and drop me to the cart

    Anodized Aluminum

    This standard T-handle can be used with any Rotopax pack mount base.

    (T-handle only, mount base not included)

    • $16.95
  • Drag and drop me to the cart

     

     

    New Anodized Aluminum

    Already have a Rotopax brand pack mount but wish it had more strength and tightening power for extreme use? Swap this DLX T-handle into your existing Rotopax mount.

    (T-handle only, mount base not included)

    • $21.95
  • Drag and drop me to the cart

    New Anodized Aluminum

    Already have a Rotopax brand pack mount but wish it would lock? Swap this locking T-handle into your existing Rotopax mount. Unique design provides extra tightening power for ultimate security.

    (T-handle only, mount base not included)

    • $54.95
  • Drag and drop me to the cart

     

     

    New Anodized Aluminum.

    Finally, you can stack multiple packs together! Use in conjunction with a pack mount (RX-PM, RX-PM-DLX, RX-PM-LOX).

    • $32.95
  • Drag and drop me to the cart

     

     

    Use this Extension to stack any Fuel Pack on top of the 3 Gallon RotopaX, 3.5 FuelpaX, or 4.5 FuelpaX.

     

     

    Use the standard Extension if stacking the 3 Gallon on top of a 1,2 or 4 Gallon Fuel Pack.

    • $32.95
  • Drag and drop me to the cart

    Powder coated steel single mounting plate easily attaches to: ATV rack, UTV frame, trailer wall, etc.

    Holds a single 1, 1.75, 2 or 3 gallon pack. (use Universal Mounting Plate for 2 gallon combos and 4 gallon packs)

    7 1/2" x 7 3/8" x 1/4"

    *This has not been modified for Fuelpax Mounts

     

    • $27.95
  • Drag and drop me to the cart

    Powder coated steel universal mounting plate easily attaches to: ATV rack, UTV frame, trailer wall, etc.

    Holds 2 gallon combos or 4 gallon packs. (use Single Mounting Plate for 1, 1.75, 3 and 2 gallon single packs)

    Perfect fit on Polaris Ranger! 24"x7"x.078" (14 gauge)

    Pack mounts not included.

    *This has not been modified for Fuelpax Mounts

     

     

    • $54.95
  • Drag and drop me to the cart

    Heavy-duty, powder coated steel L-Bracket.

    8 gauge (.172") steel

    Picture shown with Standard Pack Mount (not included)

     

    • $38.95
  • Drag and drop me to the cart

    Tire Mount designed to fit with Jeep spare tire.

    Can be combined with Universal Mounting Plate for all of our packs. 

    Adjustable in length from 4 to 7 inches.

    *This has not been modified for Fuelpax Mounts

     

    • $98.95
  • Drag and drop me to the cart

    Easily attaches to common bed rails in Toyota and Nissan trucks.

    Heavy-duty, powder coated steel pack mount.

    Pack mount not included.

     

    • $36.95
  • Polaris Base Plate
    • 20% off
    Drag and drop me to the cart

    The quickest, strongest way to mount your Rotopax to your Polaris Sled.

    We have designed this new mount exclusively for the Polaris Sleds.

    Never run out of fuel again! Use with our 1, 2 or NEW 1.75 gallon packs.

    (Pack mounts and pack are for illustration only, not included)

    *No drilling required

    • $57.56
  • 3 Gallon Gasoline
    • 1% less
    Drag and drop me to the cart

    Capacity

    Each single pack holds 3 gallons

    Dimensions

    16 L x 15 W x 4 1/2 H

    Red gas container only, mounting kit sold separately, Spout included, Made in the USA. 

    Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

    PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

     

    • $98.95
  • 4 Gallon Gasoline
    • 8% less
    Drag and drop me to the cart

    Capacity

    4 gallons

    Dimensions

    34 1/2 L x 13 1/4 W x 3H

    Red Gas container only, mounting kit sold separately, Spout included, Made in the USA

    Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

    CARB EO: G-11-044B

     *Requires two mounts

    PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

    • $109.95
  • Drag and drop me to the cart

     

    Not available to Dealers.

    We apologize for the inconvenience, but all Fuelpax containers and Fuelpax pack mounts are currently on back order.

    FuelpaX 1.5 Gallon Gas 

    Have you ever been out and needed extra fuel? Are your current fuel cans leaking? It doesn't matter what you have. Jeep, Nissan, Yamaha, side by side, ATV, UTV, snow sled, motorcycle, trailer, Honda, Polaris, RZR... No matter what you drive, and if it needs fuel- FuelpaX should be the first fuel pack you think of. 

     
    14"X14"X3.5" 
     
    Our packs are individually pressure tested and manufactured 100% in the USA by American workers, ensuring a quality, leak free product. Our goal is to provide you with a product unlike any other fuel pack maker. We are the elite jerry can provider to enthusiasts worldwide! 
     
    FuelpaX comes with a 5 year manufacturer (thats us) warranty!
     
    If you are ready for a unique product, and an item that will stand up to the test of time- it's right here. 
     
    PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.
     
    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.
     

    CARB EO #: G-16-041

     
    • $65.99
  • FuelpaX Deluxe Pack Mount
    • 12% less
    Drag and drop me to the cart

     

     

    New!  Our unique DLX design provides extra tightening power for extreme use. Comes with a 1 year warranty.

     

    We have multiple ways to mount your FuelpaX to whatever you are using them on- from ATV's and UTV's, 4x4's, Motorcycles, Snowmobiles, Watercraft, Trucks, Trailers- you name it! Our unique designs add strength and provide extra tightening power. These are not cheap injection molded plastic parts that will fail when you are 25 miles down the trail.

    The clamping part of the mount is identical to its Rotopax DLX cousin- anodized alimunum- but the main difference is the base. The Fuelpax base is a lower cost alternative, but with close to the full strength of the premium Rotopax line!

    Also compatible with all RotopaX brand fuel and water containers

    STACKING OF FUELPAX IS ONLY RECOMENDED USING THE ROTOPAX PACK MOUNT LINE DUE TO THE ADDED DURABILIY OF THE SOLID BASE. 

    TECH HINT...

    THE 1.5 AND 2.5 FUELPAX USE THE 1.75 ROTOPAX EXTENSION AND THE 3.5 AND 4.5 FUELPAX USE THE ROTOPAX 3 GALLON EXTENSION... 

     

    • $32.99
  • Product is out of stock

    Dimensions 21.5L x 11H x 4.5W

     

    Select Timbersled Model Below

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

    • $164.99
  • Product is out of stock

    We apologize for the inconvenience, but this item is temporarily out of stock

     

    Use this empty storage pack to stuff whatever you need into. Great for carrying your lunch, some dry socks, your cell phone, anything!

    Capacity

    Each single pack holds about 2 gallons worth of stuff. You can actually cram quite a bit of useful items in here.

    Dimensions

    17 3/4 L x 13 1/4 W x 3 H

    • $74.95
  • Drag and drop me to the cart

     

     

    Introducing the NEW RotopaX 2 Gallon. Same capacity and dimensions as our original 2 Gallon without the complicated twisting bottom! For those that love the shape and size of the original, but also like saving some money, this is the pack for you. 

     

    Capacity
    Each single pack holds 2 gallons

    Dimensions
    17 1/4 L x 13 1/2 W x 3 H

    Red Gas container only, mounting kit sold separately, Spout included, Made in the USA

    Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

    CARB EO: G-11-044B

     

    PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

     

    • $76.95
  • Drag and drop me to the cart

    Capacity
    Each single pack holds 1.75 gallons (Nearly 2 gallons completley filled)

    Dimensions
    14 1/2" x 13 1/4" x 3 1/2"

    Red Gas container only, mounting kit sold separately, Spout included, Made in the USA

    Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

    CARB EO: G-11-044B

    PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

     

    • $71.95
  • Drag and drop me to the cart

     

     

    Introducing the NEW RotopaX 2 Gallon. Same capacity and dimensions as our original 2 Gallon without the complicated twisting bottom! For those that love the shape and size of the original, but also like saving some money, this is the pack for you. 

     

    Capacity
    Each single pack holds 2 gallons

    Dimensions
    17 3/4 L x 13 1/4 W x 3 H

    White Water container only, mounting kit sold separately, Spout included, Made in the USA

    Roto-molded water can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

     

    • $49.95
  • Product is out of stock

     

    RotopaX is proud to indroduce a brand new container for 2020. RollpaX is an ideal solution for carrying extra fuel or water on any roll bar or flat surface. With a 1.5 Gallon Capacity, RollpaX will give you enough fuel and water to keep the adventure going for that much longer. High grade CNC machined aluminum mounts are available in multiple bar diameter sizes ,as well as a flat version that uses our standard backmount hole pattern. This is to be sure that they will fit perfectly on any vehicle or surface you have.

     

    1-3/4" and 2" Bar Mounts will include self adhesive rubber strip to fit smaller bar diameter if necessary.

     

    Dimensions: 

    24 L x 5 W x 5 1/2 H 

     

    OEM Roll Bar Tube Diameters:

     

    POLARIS

    Pro 2 seat and 4 seat 2.0″

    Turbo S 1.75″
    XP1000 AND XP4 1000 1.75”
    XP Turbo and XP4 Turbo 1.75”
    RZR 900 2015 and up 1.75”
    2014 and older RZR’s Perimeter 1.75”
    2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)

    General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
    Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
    Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview

    Polaris RZR 170 1.25″

    YAMAHA
    YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
    Rhino Perimeter 1.75” Top Crossbars 1.5”
    Rhino Steering column 1.5”
    Viking and Viking  6 seater  2.0”
    Wolverine Perimeter 2.0” Top Crossbars 1.5”

    KAWASAKI
    Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”

    HONDA

    Talon 2.0″
    Pioneer 1000 1.75”
    Pioneer 700 1.625”
    Pioneer  500 1.625”
    Big Red 1.625”

    ARCTIC CAT

    XX 1.75″
    Wildcat / Wildcat 4 1.75″
    Prowler (must have aftermarket cage installed)

    CANAM

    Maverick X3 Perimeter 2 seat and 4 seat 1.85″

    Maverick X3 Some top crossbars are 1.5″

    Maverick X3 Rear harness bar 2.5″

    Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

    Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

    Commander 2.0”

     

    Please confirm on your own roll bar before purchasing as models change and vary. You can use the pipe-size ruler found HERE to print out a ruler to test.

     

    (WARNING)

    Always mount Gasoline Container (RollpaX) within the protected area of the Rollbar, to eliminate risk of fire or bodily harm in the case of an accident/rollover.

    PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.
     

    SELECT MOUNTING HARDWARE BELOW

    • $186.95
  • Drag and drop me to the cart

    NOW SHIPPING!

    Introductory Price!

     

     

    Brand New Product! Mount Kit for RollpaX!

    RotopaX is proud to indroduce a brand new container for 2020. RollpaX is an ideal solution for carrying extra fuel or water on any roll bar or flat surface. With a 1.5 Gallon Capacity, RollpaX will give you enough fuel and water to keep the adventure going for that much longer. High grade CNC machined aluminum mounts are available in multiple bar diameter sizes, as well as a flat version that uses our standard backmount hole pattern. This is to be sure that they will fit perfectly on any vehicle or surface you have.

     

    1-3/4" and 2" Bar Mounts will include self adhesive rubber strip to fit smaller bar diameter of necessary.  

     

    OEM Roll Bar Tube Diameters:

     

    POLARIS

    Pro 2 seat and 4 seat 2.0″

    Turbo S 1.75″
    XP1000 AND XP4 1000 1.75”
    XP Turbo and XP4 Turbo 1.75”
    RZR 900 2015 and up 1.75”
    2014 and older RZR’s Perimeter 1.75”
    2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)

    General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
    Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
    Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview

    Polaris RZR 170 1.25″

    YAMAHA
    YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
    Rhino Perimeter 1.75” Top Crossbars 1.5”
    Rhino Steering column 1.5”
    Viking and Viking  6 seater  2.0”
    Wolverine Perimeter 2.0” Top Crossbars 1.5”

    KAWASAKI
    Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”

    HONDA

    Talon 2.0″
    Pioneer 1000 1.75”
    Pioneer 700 1.625”
    Pioneer  500 1.625”
    Big Red 1.625”

    ARCTIC CAT

    XX 1.75″
    Wildcat / Wildcat 4 1.75″
    Prowler (must have aftermarket cage installed)

    CANAM

    Maverick X3 Perimeter 2 seat and 4 seat 1.85″

    Maverick X3 Some top crossbars are 1.5″

    Maverick X3 Rear harness bar 2.5″

    Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

    Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

    Commander 2.0”

     

    Please confirm on your own roll bar before purchasing as models change and vary. You can use the pipe-size ruler found HERE to print out a ruler to test.

     

     

     

    (WARNING)

    Always mount Gasoline Container (RollpaX) within the protected area of the Rollbar, to eliminate risk of fire or bodily harm in the case of an accident/rollover.

    SELECT HARDWARE SIZE BELOW

    • $109.95
  • Product is out of stock

    INTRODUCING ROTOTRAX!

     Brand New Product!! 

     

     

    RototraX are traction boards compatible with our RotopaX hardware. With the same mounting pattern as our 4 gallon (two 2 gallon) container RototraX will mount in all the places our fuel container can. RototraX are manufactured with the same high durability plastic and manufacturing technology as RotopaX. With great durability and a fair price point, RototraX are an excellent upgrade to your offroad or overland vehicle. Various colors coming soon! 100% Made in the USA!!

    To stack Traction Boards on top of RotopaX Containers, Use our 2 Gallon Extension (RX-EXT) or to stack 4 boards use our 3 Gallon Extension (RX-3EXT). To stack 4 boards you will need a specific set of hardware. Please email our support email to receive the product.
     Comes in SETS OF TWO Traction Boards 

    The mounting holes line up with our 4 Gallon Rotopax container, the mounting holes will not line up with the 4.5 Gallon Fuelpax.

    ONLY LOX and DLX Pack Mounts will work with RototraX

    Dimensions: 45" X 13" 

    Mounting holes 17.25" center to center. 

    Weight: 11.5 Pounds (per set)

    Red, Blue, Orange and OD Green colors coming soon, intro price 125$

    Currently working on weight ratings, coming soon

    Full 1 year warranty on physically broken boards, no warranty for melted or warped boards. 

     

     

    • $153.95
  • Page:
  •  
  • 1
  • 2
  •  
Per page: