Blemished Items

We have some blemished 1 Gallon gas packs available. These packs are the same quality as our regular packs, but with minor cosmetic defects either on the surface or inside the neck.

Each pack is pressure tested like our regular packs ensure they are leak proof. We offer a 1 year warranty on blemished products due to the discounted price.

PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

NOT AVAILABLE TO DEALERS.

Capacity
Each individual pack holds 1 gallon

Dimensions
9 1/2 L x 13 1/4 W x 3 H

Red gas container only, mounting kit sold separately, Spout included, Made in the USA. 

Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

We have some blemished 1.75 Gallon gas packs available. These packs are the same quality as our regular packs, but with minor cosmetic defects either on the surface or inside the neck.

Each pack is pressure tested like our regular packs ensure they are leak proof. We offer a 1 year warranty on blemished products due to the discounted price

NOT AVAILABLE TO DEALERS.

PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.

PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.

RotopaX 1.75 Gallon Gasoline Pack

Size is 13.50" Wide by 15.00" Tall by 3.5" Deep

We have some blemished rollpax gas packs available. These packs are the same quality as our regular packs, but with minor cosmetic defects either on the surface or inside the neck.

Each pack is pressure tested like our regular packs ensure they are leak proof. We offer a 1 year warranty on blemished products due to the discounted price.

RotopaX is proud to indroduce a brand new container for 2020. RollpaX is an ideal solution for carrying extra fuel or water on any roll bar or flat surface. With a 1.5 Gallon Capacity, RollpaX will give you enough fuel and water to keep the adventure going for that much longer. High grade CNC machined aluminum mounts are available in multiple bar diameter sizes ,as well as a flat version that uses our standard backmount hole pattern. This is to be sure that they will fit perfectly on any vehicle or surface you have.

1-3/4" and 2" Bar Mounts will include self adhesive rubber strip to fit smaller bar diameter if necessary.

Dimensions: 

24 L x 5 W x 5 1/2 H 

OEM Roll Bar Tube Diameters:

POLARIS

Pro 2 seat and 4 seat 2.0″

Turbo S 1.75″
XP1000 AND XP4 1000 1.75”
XP Turbo and XP4 Turbo 1.75”
RZR 900 2015 and up 1.75”
2014 and older RZR’s Perimeter 1.75”
2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)

General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview

Polaris RZR 170 1.25″

YAMAHA
YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
Rhino Perimeter 1.75” Top Crossbars 1.5”
Rhino Steering column 1.5”
Viking and Viking  6 seater  2.0”
Wolverine Perimeter 2.0” Top Crossbars 1.5”

KAWASAKI
Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”

HONDA

Talon 2.0″
Pioneer 1000 1.75”
Pioneer 700 1.625”
Pioneer  500 1.625”
Big Red 1.625”

ARCTIC CAT

XX 1.75″
Wildcat / Wildcat 4 1.75″
Prowler (must have aftermarket cage installed)

CANAM

Maverick X3 Perimeter 2 seat and 4 seat 1.85″

Maverick X3 Some top crossbars are 1.5″

Maverick X3 Rear harness bar 2.5″

Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Commander 2.0”

Please confirm on your own roll bar before purchasing as models change and vary. You can use the pipe-size ruler found HERE to print out a ruler to test.

(WARNING)

Always mount Gasoline Container (RollpaX) within the protected area of the Rollbar, to eliminate risk of fire or bodily harm in the case of an accident/rollover.

PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.
 

SELECT MOUNTING HARDWARE BELOW

We have some blemished rollpax water packs available. These packs are the same quality as our regular packs, but with minor cosmetic defects either on the surface or inside the neck.

Each pack is pressure tested like our regular packs ensure they are leak proof. We offer a 1 year warranty on blemished products due to the discounted price.

RotopaX is proud to indroduce a brand new container for 2020. RollpaX is an ideal solution for carrying extra fuel or water on any roll bar or flat surface. With a 1.5 Gallon Capacity, RollpaX will give you enough fuel and water to keep the adventure going for that much longer. High grade CNC machined aluminum mounts are available in multiple bar diameter sizes, as well as a flat version that uses our standard backmount hole pattern. This is to be sure that they will fit perfectly on any vehicle or surface you have.

1-3/4" and 2" Bar Mounts will include self adhesive rubber strip to fit smaller bar diameter of necessary.  

OEM Roll Bar Tube Diameters:

POLARIS

Pro 2 seat and 4 seat 2.0″

Turbo S 1.75″
XP1000 AND XP4 1000 1.75”
XP Turbo and XP4 Turbo 1.75”
RZR 900 2015 and up 1.75”
2014 and older RZR’s Perimeter 1.75”
2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)

General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview

Polaris RZR 170 1.25″

YAMAHA
YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
Rhino Perimeter 1.75” Top Crossbars 1.5”
Rhino Steering column 1.5”
Viking and Viking  6 seater  2.0”
Wolverine Perimeter 2.0” Top Crossbars 1.5”

KAWASAKI
Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”

HONDA

Talon 2.0″
Pioneer 1000 1.75”
Pioneer 700 1.625”
Pioneer  500 1.625”
Big Red 1.625”

ARCTIC CAT

XX 1.75″
Wildcat / Wildcat 4 1.75″
Prowler (must have aftermarket cage installed)

CANAM

Maverick X3 Perimeter 2 seat and 4 seat 1.85″

Maverick X3 Some top crossbars are 1.5″

Maverick X3 Rear harness bar 2.5″

Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Commander 2.0”

Please confirm on your own roll bar before purchasing as models change and vary. You can use the pipe-size ruler found HERE to print out a ruler to test.

(WARNING)

Always mount Gasoline Container (RollpaX) within the protected area of the Rollbar, to eliminate risk of fire or bodily harm in the case of an accident/rollover.

SELECT MOUNTING HARDWARE BELOW