NOW SHIPPING!

Introductory Price!

Brand New Product! Mount Kit for RollpaX!

RotopaX is proud to indroduce a brand new container for 2020. RollpaX is an ideal solution for carrying extra fuel or water on any roll bar or flat surface. With a 1.5 Gallon Capacity, RollpaX will give you enough fuel and water to keep the adventure going for that much longer. High grade CNC machined aluminum mounts are available in multiple bar diameter sizes, as well as a flat version that uses our standard backmount hole pattern. This is to be sure that they will fit perfectly on any vehicle or surface you have.

1-3/4" and 2" Bar Mounts will include self adhesive rubber strip to fit smaller bar diameter of necessary.  

OEM Roll Bar Tube Diameters:

POLARIS

Pro 2 seat and 4 seat 2.0″

Turbo S 1.75″
XP1000 AND XP4 1000 1.75”
XP Turbo and XP4 Turbo 1.75”
RZR 900 2015 and up 1.75”
2014 and older RZR’s Perimeter 1.75”
2014 and older Polaris Ranger and RZR and RZR S and XP Rear Harness Bar and Rear Bumper crossbars 1.5” (4 seat versions have a 1.25” rear top crossbar as well)

General (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” top crossbar only (rearview mount)
Ranger (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps)1.75” rear harness bar only
Ranger Crew (Pro Fit cage NOT ROUND use PF-OUT & PF-IN clamps) Use 9” Bolt On mirror for rearview

Polaris RZR 170 1.25″

YAMAHA
YXZ 1000 1.75″ Perimeter Top crossbars 1.5”
Rhino Perimeter 1.75” Top Crossbars 1.5”
Rhino Steering column 1.5”
Viking and Viking  6 seater  2.0”
Wolverine Perimeter 2.0” Top Crossbars 1.5”

KAWASAKI
Kawasaki Teryx / Teryx 4 Perimeter 1.875” Top Crossbars 1.7”

HONDA

Talon 2.0″
Pioneer 1000 1.75”
Pioneer 700 1.625”
Pioneer  500 1.625”
Big Red 1.625”

ARCTIC CAT

XX 1.75″
Wildcat / Wildcat 4 1.75″
Prowler (must have aftermarket cage installed)

CANAM

Maverick X3 Perimeter 2 seat and 4 seat 1.85″

Maverick X3 Some top crossbars are 1.5″

Maverick X3 Rear harness bar 2.5″

Maverick Sport X XRC (Pro Fit cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Maverick Trail (Profile cage NOT ROUND use PF-OUT & PF-IN)1.85” on all other round tubes on cage. 1.5″ on bumpers

Commander 2.0”

Please confirm on your own roll bar before purchasing as models change and vary. You can use the pipe-size ruler found HERE to print out a ruler to test.

(WARNING)

Always mount Gasoline Container (RollpaX) within the protected area of the Rollbar, to eliminate risk of fire or bodily harm in the case of an accident/rollover.

SELECT HARDWARE SIZE BELOW

Comes with 2 plates and a heavy duty ratchet strap.

Mounts to any size spare tire and carries gas, water, or storage packs. 

Pre-drilled holes for RotopaX pack mounts.

Powder coated textured black.

3/16″ steel.

Made in the USA

This mounting system is not compatible with the Fuelpax deluxe pack mounts.

Our Basic Mount

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Our unique designs adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Our unique designs adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

(We do not carry spare keys. We recommend storing one of the 2 included keys in a safe place)

Lock your Rotopax fuel pack or storage box. Unique design provides extra tightening power for ultimate security.

Please note sometimes the actual lock can get stuck if it exposed to the weather and elements. This is not unique to this product- most metal materials will rust when outside. We recommend an occasional spray with graphite or other spray lubricant (PB Blaster works great) into the lock to prevent it from rusting. 

If you are using this mount with an extension it will defeat the purpose of the locking capability.

Comes with a 1 year warranty.

New Anodized Aluminum.

Finally, you can stack multiple packs together! Use in conjunction with a pack mount (RX-PM, RX-PM-DLX, RX-PM-LOX).

Use this Extension to stack any Fuel Pack on top of the 1.75 Gallon.

Use the standard Extension if stacking the 1.75 Gallon on top of a 1,2 or 4 Gallon Fuel Pack. (alternate sku RX-EXT-L)

Use this Extension to stack any Fuel Pack on top of the 3 Gallon RotopaX, 3.5 FuelpaX, or 4.5 FuelpaX.

Use the standard Extension if stacking the 3 Gallon on top of a 1,2 or 4 Gallon Fuel Pack.

Powder coated steel universal mounting plate easily attaches to: ATV rack, UTV frame, trailer wall, etc.

Holds 2 gallon combos or 4 gallon packs. (use Single Mounting Plate for 1, 1.75, 3 and 2 gallon single packs)

Perfect fit on Polaris Ranger! 24"x7"x.078" (14 gauge)

Pack mounts not included.

*This has not been modified for Fuelpax Mounts

Powder coated steel single mounting plate easily attaches to: ATV rack, UTV frame, trailer wall, etc.

Holds a single 1, 1.75, 2 or 3 gallon pack. (use Universal Mounting Plate for 2 gallon combos and 4 gallon packs)

7 1/2" x 7 3/8" x 1/4"

*This has not been modified for Fuelpax Mounts

Introducing the Jeep JK Tailgate mount. This mount covers your stock tailgate hinges with a heavy duty hinge cover. No more changing the entire hinge or needing a aftermarket tire carrier to hold fuel on the side of you spare tire! Included with this mount is all of the hardware that you need to carry your spare fuel container. 

Fit your 1, 1.75, 2, 3, and 4 (Universal Mounting Plate Required to mount 4 gallon container) Gallon RotoPaX

Or your 1.5, 2.5, and 3.5 Gallon FuelPaX!

Accepts both FuelPaX and RotoPaX Mounts!

Fuel Container and mount sold separately. 

Pictured with a 33" spare tire.

The easiest way to mount Rotopax on your RZR.

Powder coated steel plate fits nicely over rear cross-bar.

Secures easily with included clamp.

Includes One Plate & Clamp. While the picture shows a pack mount, this is for illustration only and is not included.

Heavy-duty, powder coated steel L-Bracket.

8 gauge (.172") steel

Picture shown with Standard Pack Mount (not included)

INTRODUCTORY PRICING!!

NEW PAX BAR MOUNT FOR USE WITH ROTOPAX AND FUELPAX MOUNTS! 

Can be mounted on 1.5"=1.8" Diameter roll bar with adjustment of the included rubber pad.  

To be used with ANY RotoPax or FuelPax mount at many different angles!

 Pack Mount not included. Must order seperatly. 

See the install Video below!  

Tire Mount designed to fit with Jeep spare tire.

Can be combined with Universal Mounting Plate for all of our packs. 

Adjustable in length from 4 to 7 inches.

*This has not been modified for Fuelpax Mounts

Easily attaches to common bed rails in Toyota and Nissan trucks.

Heavy-duty, powder coated steel pack mount.

Pack mount not included.

Powder coated steel backing plate used to strengthen installation of Rotopax pack mount to plastic boxes, etc.

5.5" round, 16 gauge (.063")

Anodized Aluminum

This standard T-handle can be used with any Rotopax pack mount base.

(T-handle only, mount base not included)

New Anodized Aluminum

Already have a Rotopax brand pack mount but wish it had more strength and tightening power for extreme use? Swap this DLX T-handle into your existing Rotopax mount.

(T-handle only, mount base not included)

New Anodized Aluminum

Already have a Rotopax brand pack mount but wish it would lock? Swap this locking T-handle into your existing Rotopax mount. Unique design provides extra tightening power for ultimate security.

(T-handle only, mount base not included)

Replacement Lock Cylinder with two keys

The quickest, strongest way to mount your Rotopax to your Polaris Sled.

We have designed this new mount exclusively for the Polaris Sleds.

Never run out of fuel again! Use with our 1, 2 or NEW 1.75 gallon packs.

(Pack mounts and pack are for illustration only, not included)

*No drilling required

The quickest, strongest way to mount your Rotopax to your Ski Doo.

We have designed this new mount exclusively for the Ski Doo (2009 XP shown in the photos)

Never run out of fuel again! Use with our 1, 2 or NEW 1.75 gallon packs.

(Pack mounts and pack are for illustration only, not included)

The quickest, strongest way to mount your Rotopax to your Arctic Cat M8 short seat.

We have designed this new mount exclusively for the Arctic Cat M8 short seat. The sled in the photos is a 2009 SkiDoo XP, and is for reference only.

Never run out of fuel again! Use with our 1, 2 or NEW 1.75 gallon packs.

Pack mounts and pack are for illustration only, not included

*May require drilling holes